FOX 36 FORK HOW TO
FOX 36 FORK PLUS

To adjust the rebound control, increasing it by three clicks lowers the height of the front end. If traversing through rocky terrain, you may minimize deflection by reducing the high-speed compression slightly. When it comes to damping, Pike has three modes to choose from while Fox 36 offers no lockout or platforms and opts to provide users with high and low-compression damping that is fully adjustable. Riding steep technical trails on the Pike fork requires you to add an extra spacer to improve its performance regardless of the wheel you use or the travel you have. If you like to ride fast, you will benefit from adding spacers to create more ramp-up and mid-stroke support.ДЇor less aggressive riding, use fewer volume-reducers which will guarantee the access of all available travel. Air SpringД«oth models are air-sprung and their spring curves are custom-tuned by using volume-reducers. on the other hand, Pike features a 15mm Maxle which is less stiff and much faster in changing the wheel with no tools required.

FOX 36 FORK PLUS

PikeвЂ™s travel length can be adjusted from 160m to 120mm by replacing the air-shaft with a shorter item that is specific to travel.ДЄnother plus to the Fox 36 is that is compatible in use with the 15mm on the adapter and the 20mm. Using the Pike fork, there is a great convenience in the Maxle chassis which beats all benefits associated with the 36вЂ™s stiff design. By switching the axle from the 15mm to the 20mm option on 36, more weight is cut off. With this setup, the weight difference is lessened to 70g. However, in the application, though both models use post brake mounts, a 30g adapter is needed to run a rotor on the Pike while the 36вЂ™s rotor is directly mounted. In terms of weight, the Pike fork is lighter than the 36 by about 100 grams. The Fox has an advantage in stiffness because it is designed with a through-axle held in place by pinch bolts fitted on either side. Legs on Fox measure 36mm compared to 35mm on Pike fork. Clean all fork components using shop towel to ensure dirt and oil is removed.RockShox Pike vs Fox 36 вЂ“ How they compare Now turn the fork upright and remove lowers over tub/bucket to catch any escaping oil.Д¦. Fully unthread foot nuts, ensuring crush washers come with them. Using the corresponding socket for each foot nut or the proper Fox removal tool, gently tap to release inner shaft from its seat.ДҐ. Using 15mm socket for damping side and 10mm socket for air-spring side, undo both foot nuts three turns.Д¤. Using 2mm Allen key, loosen grub screw and remove rebound adjuster.ДЈ. Ensure fork is thoroughly cleaned externally, notably around the seals.Дў.

Remove the fork from your bike and clamp the steerer in a bike stand. Charlie has been fixing bikes since 2005 - for the last couple of seasons, he has been working as a World Cup DH mechanic for the Pivot and Kona teams.

Tools Required: 10mm/15mm socket wrenches, soft mallet, pick, 2mm Allen key, syringe, 20wt Gold fork fluid, tub/bucket, shop towel, suspension grease.Д¬harlie Collins.

On top of this, oil can also escape, which is normal, so youвЂ™ll need to top it up regularly. The Fox 36 uses a bath of lubricating oil in the lowers to protect its moving parts, and over a period of time, dirt and other contaminants can enter the fork, reducing the lubricity and protection of the oil. > The best mountain bike suspension forks

FOX 36 FORK HOW TO

Here we show you how to do a basic Fox 36 service. With the Fox 36вЂ™s high price tag comes high performance and it pays to look after it.

Fox 36 fork